Key features:
Good machinability, high strength and good corrosion resistance. Suitable for heavy-duty gears and bearings with medium to high loads.
Full alloy description:
A.W. Fraser Alloy PB1 is a phosphor bronze conforming to the requirements of B.S. 1400 - 1985 alloy PB1.
PB1 has good machining properties, high strength and good corrosion resistance to seawater and brine, making it suitable for pump and valve components.
PB1 is suitable for bearings having medium to high loads and speeds and good resistance to impact loading or pounding.
PB1 bearings must have adequate lubrication and good alignment.
PB1 is suitable for heavy duty gears and wormwheels with high working loads and high speeds and adequate lubrication and alignment.
The composition of A.W. Fraser alloy PB1 is strictly controlled as are the casting conditions.
PB1 products are manufactured using the latest continuous and centrifugal casting technology.
Machinability Rating: 30
SAE Grade: 65
Download tech sheet:
For a full alloy summary, including Chemical Composition and Mechanical Properties, please download our tech sheet in PDF format below...
Search for an alloy by keyword...
Disclaimer
The alloy information provided on this page is indicative and must not be taken as a substitute for the full specification from which it is drawn. In particular, the mechanical property requirements vary widely with product specification.
The information contained on this page is based on our present knowledge and is given in good faith as a precursor to discussing your specific requirements with us.
No liability will be accepted by AW Fraser in respect of any action taken by any third party in relying on the data on this page.